Step 4 Placing Equipment on the Moisture Map

Step 4 - Placing Equipment on the moisture map*

  1. From the moisture map, use the place button and drag the dehumidifier onto the map.
  2. Select the equipment asset from the inventory list - if there is more than one drying environment select the appropriate one.
  3. Optional- add reading for the device
  4. In the same manner drag other equipment on to the moisture map. For air movers, you need to select the room after dropping on to map, then continue with the inventory selection.
  • Access the moisture map by tapping the X, and then tap on the Atmosphere and tap the moisture map at the bottom.