Encircle Floor Plan can be used on any iOS or Android device that meets the minimum operating system (OS) requirements, including tablets!
Minimum OS requirements: iOS 18 and Android 10. Most, if not all, Android and iOS devices from the past 3 years meet this minimum OS requirement.
Floor Plan is 95% accurate with any supported device. Accuracy increases to 97% if using an iPhone or iPad with LiDAR (see list below of LiDAR devices).
Check the following lists to see if your device is supported by Floor Plan.
iOS devices
Not sure which one you have? Find the model number of your device, then identify your iPhone model or identify your iPad model. Note that newer devices will offer improved scanning.
We require at least iOS 18.0 to run on your Apple devices.
| Device | Model |
| iPhone | Click here to check Apple's list of iPhones that support iOS 18. |
| iPad | Click here to check Apple's list of iPads that support iOS 18. |
LiDAR Devices
Devices with LiDAR offer better overall accuracy. They are usually the Pro version of the iOS model.
| iPhone | iPad |
| iPhone 12 Pro | iPad Pro 2020 (iPad Pro 12.9-inch 4th gen, iPad Pro 11-inch 2nd gen) |
| iPhone 12 Pro Max | iPad Pro 2021 |
| iPhone 13 Pro | iPad Pro 2022 |
| iPhone 13 Pro Max | iPad Pro 2024 |
| iPhone 14 Pro | |
| iPhone 14 Pro Max | |
| iPhone 15 Pro | |
| iPhone 15 Pro Max | |
| iPhone 16 Pro | |
| iPhone 16 Pro Max |
Android Devices
The general minimum requirement for an Android device is ARCore support and Android 10 or later.
If you are unsure about your Android device, double-check that it is running Android 10 or higher, and check the ARCore supported devices list for your model.
Mobile Data & Offline Mode
An internet connection (WiFi or mobile data) is not required to create scans. You can create a scan/capture in offline mode if needed.
You will, however, need an internet connection (WiFi or mobile data) to submit the scan for processing into a Floor Plan. The 6-hour delivery time begins when you submit the Floor Plan scan.
Battery Consumption
Scanning uses a lot of processing power. However, you shouldn't need more than 5% battery life to complete a scan, even a large one. We recommend scanning a floor plan when you have at least 50% battery life.
Updated